How to Properly Clean Tile Floors

July 31, 2020 Published by Leave your thoughts

Part of ensuring your floors last you for years to come is staying on top of regular cleanings. This is especially important for tile floors—cleaning them prevents dirt and debris from accumulating and eating away at the glaze or finish that protects the actual tile material.

While you don’t need to scrub your tile floors every single time you clean other parts of your kitchen or bathroom, it’s still important to check your floors for signs of grime and be thorough about cleaning your tile floors in Monroe County, PA as needed.

Ceramic and porcelain are far and away the most common types of tiles in kitchens and bathrooms. Here is what you need to know about the proper steps for cleaning tile floors:

  • Clean up loose debris: Before you begin scrubbing, you should sweep and/or vacuum your floors. This is a task you can perform more regularly without necessarily having to perform a full scrubbing, as it will keep dirt from building up and dulling the floor. While the tiles themselves may be resistant to dirt, any grit in the debris can dull out the glaze, exposing the tile material and making it more vulnerable.
  • Use the proper equipment: When you prepare to scrub the surface, make sure you’re using the proper tools for the job. Your cleaning agent should be water mixed with a mild detergent, and you should scrub either with a rag or with a chamois-type mop, not a sponge mop. These mops are ideal for tile cleaning because they won’t push the dirty water into grout, unlike sponge mops. Change water frequently if you have to cover large areas, as using dirty water will result in a cloudy appearance on the floor.
  • Attack stains smartly: If you see stains in the tile floor, you should try to figure out what caused them, and then choose the proper cleaner for dealing with them. Follow all of the instructions on the cleaner you use when going after stains.
  • Avoid leaving behind soap residue: If you leave behind soap residue or cleaner, this will also result in a hazy appearance to your tiles, even if they’re actually clean. One way to avoid this is by not using too much soap or detergent mixed into your water. But if the hazy appearance has already occurred on your tiles, you can remove it with an all-purpose cleaner of a non-abrasive variety, or a homemade acidic cleaner like vinegar or lemon juice.
  • Dry the area: Never let glazed tile floors air dry—this will result in the formation of water spots on the surface. Use a lint-free cloth as soon as you’re done washing the area. To avoid getting down on your hands and knees, you can push it around the floor with your feet.

These are just a few tips to help you get the best results out of cleaning your tile floors in Monroe, County, PA. For more information, we encourage you to contact the team at The Floor Source today.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *