How to Sand Hardwood Flooring in Monroe County, PA

October 7, 2019 Published by Leave your thoughts

Hardwood is a fantastic flooring option for many homes. Though it’s a bit more expensive than other flooring options, it looks beautiful and lasts for decades. The only downside is that hardwood requires a bit more maintenance than a lot of other flooring options, namely sanding every few years. This post will teach you how to go about sanding your hardwood flooring in Monroe County, PA:

  • Load the paper: For your first run on the floors, you should load the business end of your sander with coarse sandpaper. 36-grit is a good starting point for most hardwood, but 60-grit may work if your floors don’t have much damage.
  • Practice in a hidden area: Regardless of how many times you’ve sanded your floors, be sure to start by sanding an area that’s typically hidden under furniture. You want to ensure that your sander is working properly and that you have the right sandpaper.
  • Move constantly: Tilt your sander at a 7- to 15-degree angle to the direction of the boards and start walking in a line around the room. Slowing down or stopping for too long can eat through your floor, causing way more problems than not sanding at all. You may need to go over spots more than once, but never spend too much time in one area.
  • Vacuum: There’s undoubtedly going to be a ton of sawdust in your newly-sanded room. Grab a shop-vac (or similar heavy-duty vacuum) and suck it all up! All of that dust is a health concern and makes your home quite messy, so the sooner you clean it up, the better.
  • Switch sandpaper: You’re not done sanding after that initial pass with 36-grit sandpaper. Switch to a finer grain, like 60-grit.
  • Go again: This time, run the sander in the opposite direction of what you ran it the first time. After you’ve completed your run, vacuum up all of the dust again.
  • Buff: If you plan on staining your floors, you’ll want to buff the hardwood with 100-grit sandpaper. This is easier to do with a buffer, but your sander can get the job done, too.

Why hire a pro to sand your floors?

Sure, you can sand your hardwood floors by yourself, but that’s typically not the first choice of many homeowners. Here are a few reasons to hire a professional to take care of sanding your hardwood flooring in Monroe County, PA:

  • Ensure the job is done right: Sanding isn’t exactly rocket science, but you could accidentally damage your flooring if you’re not careful. A professional will ensure that nothing goes wrong while sanding.
  • Save time: It’s safe to say that very few people want to spend a whole weekend sanding their floors. Assuming you’re not among that select group, spend your time doing something else and let a professional sand your floors!
  • Save money: Though hiring a professional isn’t free, it may be less expensive than renting all of the necessary gear to sand your floors by yourself.

If you’re interested in installing hardwood flooring in Monroe County, PA, then be sure to come by The Floor Source! Nobody beats our selection of hardwood or our competitive prices. Come into our showroom today to check out our huge selection of hardwood and all other types of flooring.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *